WAYS OF ENTERPRISE DEVELOPMENT — PROSPECTS IN TECHNOLOGIES.
Our plant was founded in 1861. Over the years, we have become one of the largest companies in Ukraine with capital-restoration reforms and modernization of electric locomotive, performing linear products of electric machines, wheelsets and manufacturing of spare parts.
A large number of technologies developed in the technological direction, the use of modern electronic systems for the repair of electrics, the manufacture of spare parts from high-quality materials that produce the products of our enterprise, allows you to save on electricity and technical service of the motor unit.
- DC power locomotive series
series ВЛ11м / 5
series ВЛ11м / 6
- AC power locomotive series
- Traction units
- DC power motors
- AC powers motors
- Auxiliary electric machines
- Wheelsets (ВЛ60) Wheelsets (ДЕ1)
Wheelsets with booms (ВЛ40)
Wheelsets with booms (ВЛ40) upgraded
Wheelsets with booms (ВЛ80T)
Wheelsets with booms (ВЛ10, ВЛ11)
Wheelsets with booms (ВЛ8)
Wheelsets with booms (ВЛ8M)
Wheelsets with traction unit racks
Wheelsets from locomotive ЧMЭ3
Wheelsets from locomotive M62 / 2M62
Wheelsets from the motor-wagon rolling stock EР2, EПЛ2T
- Products of own manufacture
Spare parts for repair of electric machines
Spare parts for electric locomotives repair
In agreement with the Customer, other works can be carried out, including the installation of radio stations, air conditioners, control systems, etc., including a full range of modernization of telecommunications with extended service.
During the modernization of electronics, it is possible to continue to operate for a considerable period of time. This allows you to significantly save Customer’s money, as it allows you to refuse purchase of new electric locomotives. For the operational characteristics of a repaired electric locomotive, existing standard types can be used and can be operated on any railroad tracks of 1520 mm circle, electrified direct and alternating currents.
If necessary, to operate the repaired electrical equipment on the general use roads PJSC “Lviv Locomotive Repair Plant” can provide the entire package of required permits. Even after the end of warranty period our company has a number of maintenance services of various types of equipment.
PJSC «Lviv Locomotive Repair Plant» offers modernization programs for different types of vehicles. The main criterion for approaches for each particular Customer is economic efficiency and the optimal cost of work. It depends on the technical condition of the machines and the each Customer’s purposes.
The modernization program solves its complex problem, so we also take into account modern sanitary norms. The workplace of the project engineer is in parallel with the technical equipment of the locomotive. Our programs of modernization comply with the requirements of Customer and are quite competitive. Modernized electric locomotives are highly reliable. In addition, maintenance facilities are significantly reduced.
OVERHAUL AND RESTORING REPAIR WITH MODERNIZATION OF TRACTION UNITS SERIES ПE2M, ПE2, OПE1AM, OПE1БM.
Modernization of important shareholders is carried out not only in the reconstruction but also in the management of energy equipment, as well as in the use of existing equipment and equipment, as well as the development of new tasks for the use of up-to-date technical solutions in terms of management and diagnostics systems.
In the scope of modernization, of traction units series ПE2м, ПE2у, OПЕ1AM, OПE1БM also is taken into account existing combined rotary-plate or screw type compressors, as well as DC motors on asynchronous ones.
Modernization of units involves improvement of their main characteristics, reduction of operating costs, maintenance of their reliability and service. Modernized, electric locomotives meet the instructions and standards, as well as sanitary rules and ergonomic requirements.
PJSC «Lviv Locomotive Repair Plant» offers the following services:
- colored and brass casting in a cockle under pressure;
- Casting on the models of replacement, cutting and bending of the metal;
- Casting of bronze, brass, aluminum billets;
- hot volumetric state
- semi-squeezing of details on presses.
- designing and manufacturing of stamps and foundry molds;
- mechanical treatment, toothpick;
- zinc plating;
- manufacture of springs;
- manufacture of metalwork tools;
- heat treatment of shafts.
PRIVATE JOINT STOCK COMPANY
«LVIV LOCOMOTIVE REPAIR PLANT».
We are always ready and open to the world for cooperation.
Address: 79018, Ukraine, Lviv, 1A Zaliznychna Street
Tel./fax.: +380 32 233 30 25
Stadnytsky Oleksandr (email@example.com)
+380 67 802 0626 Chairman of the Board
Golovashchenko Oleg (firstname.lastname@example.org)
+380 98 188 9858 Member of the Board
Nazarkevych Pavlo (email@example.com)
+380 67 340 5487 Press Center